Product photography to follow
Hydraulic Damper 8 × 100 mm
SKU: NLS-DMP-8-100
Hydraulic damper with a 8 mm rod. Controls closing speed and absorbs motion energy without providing lift — pair with a gas spring where a lid closes too quickly. Extends from 140 mm compressed to 240 mm, giving 100 mm of travel. Steel with a black oxide finish for indoor and protected outdoor use.
$16–44 CAD
Indicative. Exact pricing depends on force rating, end fittings, and quantity.
Specifications
| Rod diameter | 8 mm |
|---|---|
| Cylinder diameter | 18 mm |
| Stroke | 100 mm |
| Extended length | 240 mm |
| Compressed length | 140 mm |
| Material | Steel (black oxide) |
| Weight | 0.3 kg |
| Operating temperature | -30 °C to 80 °C |
| Charge | Hydraulic oil |
| Seal type | Standard |
| Cycle life | 50000 cycles |
| Extension speed | 80-120 mm/s |
| Mounting orientation | Rod down (preferred) |
| Force tolerance | ±10 % |
| Damping rate | Medium |
Compatible end fittings
Eyelet 8mm
Steel eyelet with an 8mm bore. The simplest and most secure termination — bolts through a bracket and cannot pop off under load.
Fits rod: 6, 8 mm
Eyelet 10mm
Steel eyelet with a 10mm bore for heavier assemblies. Requires the mounting pin to be aligned with the spring axis.
Fits rod: 8, 10, 14 mm
Ball Joint 10mm
Snap-fit socket for a 10mm ball stud. Tolerates misalignment in every axis, which makes it forgiving on brackets that are not perfectly square.
Fits rod: 8, 10 mm
Clevis Fork M8
Forked end with a cross pin, threaded M8. Pivots on a single axis — use where the spring must stay in one plane.
Fits rod: 8, 10 mm
Threaded End M8
Plain M8 male thread for customer-supplied hardware. The most flexible option when the mounting is already designed.
Fits rod: 8, 10 mm
Flat Mount Blade
Flat drilled blade for direct bolting to a panel. Lowest profile option where clearance is tight.
Fits rod: 6, 8, 10, 14 mm