Product photography to follow
Standard Gas Spring 8 × 150 mm — Stainless 304
SKU: NLS-STD-8-150-S304
Nitrogen-charged compression gas spring with a 8 mm rod and 18 mm cylinder. Force is set at manufacture to suit your application — specify the figure from the calculator when requesting a quote. Extends from 210 mm compressed to 360 mm, giving 150 mm of travel. Stainless 304 throughout, for freshwater marine, washdown, and food-processing environments.
$33–91 CAD
Indicative. Exact pricing depends on force rating, end fittings, and quantity.
Specifications
| Rod diameter | 8 mm |
|---|---|
| Cylinder diameter | 18 mm |
| Stroke | 150 mm |
| Extended length | 360 mm |
| Compressed length | 210 mm |
| Force range | 100–800 N |
| Material | Stainless Steel 304 |
| Weight | 0.45 kg |
| Operating temperature | -40 °C to 90 °C |
| Charge | Nitrogen |
| Seal type | Marine-grade |
| Cycle life | 50000 cycles |
| Extension speed | 80-120 mm/s |
| Mounting orientation | Rod down (preferred) |
| Force tolerance | ±10 % |
Compatible end fittings
Eyelet 8mm
Steel eyelet with an 8mm bore. The simplest and most secure termination — bolts through a bracket and cannot pop off under load.
Fits rod: 6, 8 mm
Eyelet 10mm
Steel eyelet with a 10mm bore for heavier assemblies. Requires the mounting pin to be aligned with the spring axis.
Fits rod: 8, 10, 14 mm
Ball Joint 10mm
Snap-fit socket for a 10mm ball stud. Tolerates misalignment in every axis, which makes it forgiving on brackets that are not perfectly square.
Fits rod: 8, 10 mm
Clevis Fork M8
Forked end with a cross pin, threaded M8. Pivots on a single axis — use where the spring must stay in one plane.
Fits rod: 8, 10 mm
Threaded End M8
Plain M8 male thread for customer-supplied hardware. The most flexible option when the mounting is already designed.
Fits rod: 8, 10 mm
Flat Mount Blade
Flat drilled blade for direct bolting to a panel. Lowest profile option where clearance is tight.
Fits rod: 6, 8, 10, 14 mm